GPIO Cables

To synchronize the cameras you have different possibilities:

• Enable the trigger output on one of the cameras and set all other cameras to hardware triggered rising/falling edge. The camera outputting the trigger signal can then be operated software triggered, and all other cameras will operate synchronously to this camera.

• Supply an external trigger signal to all cameras and set all cameras to hardware triggered.

Hint

The internal electrical connections of all cables used in the figure above are described under the following topics:

M8/M12 Adapters

• M8 cable with open endings

• M12 cable with open endings

• Sync adapter

• M8/M12 adapter

• M12/M8 adapter

IDS Model Specific Adapters

• uEye CP2 adapter

• uEye CP1

• uEye FA adapter