Compliance (N3x-Series)

All N3x camera models comply with the following standards:

Emmission

EN 61000-6-3:2007 + A1:2011

Immunity

EN 61000-6-2:2005

Safety

IEC 62368-1:2018

Certification

../_images/fcc.svg

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and

  2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IDS Imaging Development Systems Inc.
92 Montvale Ave, Suite 4750
Stoneham, MA 02180
United States
Phone No.: +1 781 787 0048
E-Mail: info@ids-imaging.com

../_images/ukca.svg

UKCA

IDS Imaging Development Systems Ltd.
Cheyenne House, West Street
Farnham, Surrey, GU9 7EQ
United Kingdom
Phone No.: +44 1256 962910
E-Mail: info@ids-imaging.com

Illumination Hazards

See: Illumination (N3x-Series)

Intended use

Ensenso cameras are to be used to capture images for visualization and image processing tasks. The devices are designed for use in industrial environments.

Safety Instructions

Read carefully the information in this manual before installing and using an Ensenso product. The producer is not responsible for damages and injury, which can occur due to false handling of a product and ignoring the safety instructions. All warranty will be spoiled in this case. The products are not authorized for use in security relevant applications. If used in security relevant applications, the customer is responsible for the necessary approvals. If the product is modified or changed the applicable approvals like CE, FCC or UL become invalid. In this case the customer is responsible for ensuring product conformity. The products are not toys and should be kept and operated out of reach of children. All products must be connected, taken into operation and maintained only by appropriately qualified personnel. The cameras must be installed in such way that the specifications described in this manual are met. Only operate the products under ambient conditions described in this manual. Carefully observe the IP protection class for your camera model. Do not subject this product to direct sunlight, moisture or shock. Lay cables in such way that no one can step on or they do not represent a trip hazard. Keep packing materials like films away from children. In case of abuse there is a risk of suffocation.

Warning

cautionHot All devices may exhibit high housing surface temperatures when operated at high environment temperatures and/or high LED flash duty cycle times!

Note

All cameras must be installed by ESD trained professionals only.

Disposal

Ensure that equipment and components are disposed in accordance with local regulations e.g. through authorized disposal and recycling specialists or at collection points.