Network Cables

To connect the ethernet ports of cameras the following connectors are needed, depending on the camera model:

Camera Series

Required Ethernet Connector on Cable

B

M12, X-Coded, Male

C

M12, X-Coded, Male

N2x

RJ45 Plug

N3x

RJ45 Push Pull Plug according to IEC 61076-3-106,
e.g. “Harting PushPull V4 plug, RJ45” 1

N4x

RJ45 Push Pull Plug according to IEC 61076-3-106,
e.g. “Harting PushPull V4 plug, RJ45”

S

M12, X-Coded, Male

X (CP Sensors)

RJ45 Plug

X (FA Sensors)

RJ45 Push Pull Plug according to IEC 61076-3-106,
e.g. “Harting PushPull V4 plug, RJ45”

XR

M12, X-Coded, Male
1

If you don’t need IP65/67 protection, the push pull adapter can be removed and the camera can be used with a standard RJ45 plug.

Hint

For M12 X-coded and Harting PushPull connectors, special torsion resistant, drag chain compatible cables are available: